T40170

Intresserad

Är du intresserad av denna produkten vänligen kontakta oss för mer information.

Ladda ner pdf

Produktblad

Dimensions
 
graphic-data
Overall height (with rotating beacon) 2473 mm (2701 mm)
Height to steering wheel 1804 mm
Height to back of the machine — mm
Width with stabilisers down 2475 mm
Height of lifted stabilisers 1200 mm
Operator cab inside width 920 mm
Track width (front & rear) 1992 mm
Width over standard tyres 2394 mm
Operator cab outside width 930 mm
Wheelbase 2850 mm
Overall length (to front tyres) 4589 mm
Overall length (without attachment) 6107 mm
Overall length (with carriage) 6210 mm
Overall length (with forks) 7415 mm
Ground clearance 503 mm
Front wheel lifting when on stabilisers — mm
Carriage rotation angle 125°
Internal turning radius 1560 mm
External turning radius (at tyres) 4260 mm
External turning radius (at counterbalance) — mm
External turning radius (with forks) 6356 mm
T40170 Telescopic Handler  — 20/06/2005

Performance
 
Crowding force 5000 daN
Drawbar pull 4800 daN
Ground pressure on tyres 600 kPa
Ground pressure on stabilisers 1000 kPa
Rated capacity 4000 kg
Capacity (at max. height — on stabilisers) 2500 kg
Capacity (at max. reach — on stabilisers) 560 kg
Capacity (at max. height — on tyres) 1250 kg
Capacity (at max. reach — on tyres) 0 kg
Push force 4800 daN
Tipping load —
Lifting height — on stabilisers 17430 mm
Lifting height — on tyres 17180 mm
Max. reach — on stabilisers 13670 mm
Max. reach — on tyres 13730 mm
Banking correction 4°/4°
Sideshift (max.) 1400 mm

Function Time
 
Lift time — no load 12.6 s
Lift time — full load 13.2 s
Lower time — no load 6.4 s
Lower time — full load 6.2 s
Telescope in time at max. reach — no load 19.4 s
Telescope in time at max. height — no load 16.6 s
Telescope in time at max. reach — full load 19.8 s
Telescope in time at max. height — full load 16.2 s
Telescope out time at max. reach — no load 28.9 s
Telescope out time at max. height — no load 29.0 s
Telescope out time at max. reach — full load 29.4 s
Telescope out time at max. height — full load 30.0 s
Crowding time 4.7 s
Dumping time 4.5 s

Weights
 
Weight (unladen) 10970 kg
Front axle weight unladen 4720 kg
Rear axle weight unladen 625 kg
Total weight with pallet frame and forks 10290 kg
Front axle weight with pallet frame and forks 5325 kg
Rear axle weight with pallet frame and forks 5965 kg
Total weight with pallet frame and forks and 3500 kg load 15290 kg
Front axle weight with pallet frame and forks and 3500 kg load 13395 kg
Rear axle weight with pallet frame and forks and 3500 kg load 1895 kg
T40170 Telescopic Handler  — 20/06/2005

Load Charts
 

With forks and standard DUNLOP 400/80x24 153B T37 TL tyres — on stabilisers

graphic-data
T40170 Telescopic Handler  — 20/06/2005

With forks and standard DUNLOP 400/80x24 153B T37 TL tyres— on tyres

graphic-data
T40170 Telescopic Handler  — 20/06/2005

With 1,2 m2 man platform — on stabilisers

graphic-data
T40170 Telescopic Handler  — 20/06/2005

With 4 m2 man platform — on stabilisers

graphic-data
T40170 Telescopic Handler  — 20/06/2005

With 5 m2 man platform — on stabilisers

graphic-data
T40170 Telescopic Handler  — 20/06/2005

With 4 and 5 m2 man platform — on stabilisers

graphic-data
T40170 Telescopic Handler  — 20/06/2005

Chassis correction and load side shift

graphic-data
T40170 Telescopic Handler  — 20/06/2005

Engine
 
Make/Model PERKINS / 1104C-44T turbo
Fuel Diesel
Cooling Water
Rated power (DIN 6271) at 2200 RPM 74.5 kW (100 HP)
Rated speed 2200 RPM
Maximum torque at 1400 RPM 412 Nm
Number of cylinders 4
Displacement 4.4 l
Bore 105 mm
Stroke 127 mm
Consumption Not available
Lubrication Not available
Crankshaft ventilation Not available
Air filter Dry replaceable cartridge with safety element
Ignition Diesel-compression
Starting aid Not available

Electrical
 
Alternator 90 A — open
Battery 12 V — 900 cold cranking A at -18°C — 180 min reserve capacity
Starter 12 V — gear reduction type

Hydraulic System
 
Pump type Engine driven, gear type
Pump capacity 105 l/min
Combined pump capacity 144 l/min
Relief valve pressure setting — bar
Control valve Close centre
Hydraulic filter Full flow replaceable
Auxiliary flow 80 l/min

Drive System
 
Transmission Variable displacement hydrostatic pump with 480 bar working pressure and displacement from 0 to 75 cm
Main drive Hydrostatic motor with 480 bar working pressure and displacement from 160 to 45 cm

Traction
 
Tyres DUNLOP 400/80x24 153B T37 TL
Tyre pressures 4.25 bar
Low speed (forward/reverse) 0–8 km/h
High speed (forward/reverse) 0–30 km/h
Driving modes Direct drive / soft drive
T40170 Telescopic Handler  — 20/06/2005

Brakes
 
Engine braking Hydrostatic
Parking and emergency brake Mechanical, acting on both axles
Service brakes Immersed disks acting on both axles

Steering
 
Steering pump Casappa gear pump mounted on tool pump PTO
Steering modes 2WS / 4WS / CRAB
External turning radius 6356 mm

Fluid Capacities
 
Axles and reduction gears front/rear 11.9 / 11.4 l
Cooling system 17 l
Engine oil 8.5 l
Engine lubrication plus oil filter 8.5 l
Fuel tank 140 l
Hydraulic reservoir 77 l
Hydraulic system plus reservoir 145 l

Fluid Specifications
 
Coolant

Bobcat PG Coolant

5 L can - 6904844A

25 L container - 6904844B

209 L drum - 6904844C

1000 L tank - 6904844D
Engine oil
graphic-data
Fuel Diesel
Brake fluid None. Braking on hydraulic system pressure
Hydraulic fluid

Bobcat Superior SH

5 L can - 6904842A

25 L container - 6904842B

209 L drum - 6904842C

1000 L tank - 6904842D
Transmission oil

Bobcat Axle Transmission Oil

5 L can - 6904845A

25 L container - 6904845B

209 L drum - 6904845C

1000 L tank - 6904845D
Grease for hinges and boom gliders Bobcat MP Grease - 6903122
Grease for boom telescoping chains Bobcat MP Grease - 6903122
T40170 Telescopic Handler  — 20/06/2005

Controls
 
Engine Foot accelerator pedal
Starting Key-type starter switch and shutdown. Key-activated air intake heater.
Front auxiliary Electro-hydraulic proportional switch on joystick
Hydraulics lift and tilt Electro-hydraulic proportional switch on joystick
Hydraulics telescope in and telescope out Electro-hydraulic proportional switch on joystick
Service brake Pedal-activated servo valve for wet multi-disk on front and rear axle
Secondary brake Pedal-activated servo valve for wet multi-disk on front or rear axle
Parking brake Switch for activation of electro-hydraulic valve for activating spring-applied pressure release multi-disk brake
Steering Orbital hydrostatic unit, directly connected to conventional steering wheel
4WS/2WS/parallel drive selection Three-position switch on the right-hand console
T40170 Telescopic Handler  — 20/06/2005

Instruments
 

The following functions are monitored by a combination of gauges and warning lights in the operator's line of sight. The system alerts the operator of monitored malfunctions by way of audible and visual indicators.

  • Gauges

    • Rev counter

    • Total operating hours

    • Fuel gauge

    • Engine coolant temperature gauge

    • Inclinometer

  • Indicators

    • Headlight high beam (blue light)

    • Directional signal indicator (green light)

    • Preheat (yellow light)

    • Blocked air filter (red light)

    • Hydrostatic oil filter (red light)

    • Engine oil pressure (red light)

    • System voltage (red light)

    • Insufficient pressure in the parking brake (red light)

    • Accumulator (Red light)

    • Parking brake (red light)

    • General alarm (red light)

    • Low speed indicator (green light)

    • High speed indicator (green light)

    • Front axle alignment (yellow light)

    • Rear axle alignment (yellow light)

    • Turret and chassis alignment (green light)

    • Turret rotation locking pin inserted (red light)

    • Rear axle oscillation lock (yellow light)

    • Stabilizers ascending (yellow light) (or should it be retracted)

    • Stabilizers descending (yellow light) (or should it be extended)

    • Stabiliizers extended and positioned correctly (green light)

    • Fuel gauge indicator

    • Engine coolant temperature indicator

    • Forward travel (green light)

    • Reverse travel (green light)

    • Liquid crystal display (LCD)

  • Warning lights

    • Hydraulic fluid temperature over 95°C

    • Engine coolant over 103°C

    • Low oil pressure

    • Battery not charging
T40170 Telescopic Handler  — 20/06/2005

Serviceability
 

Access is available to the following through the side engine cover and access panel:

  • Air cleaner

  • Fuel filter

  • Engine oil filter

  • Engine oil dipstick

  • Starter

  • Alternator

Other accesses:

  • Hydraulic fluid fill - located below operator cab

  • Hydrostatic filter - located below operator cab

  • Hydraulic filter - located inside the hydraulic tank

Access is available to the following within the cab:

  • Fuses, diodes and relays

  • 3B6 control box

Engine cover has a lock for vandal-proofing and is equipped to hold open while servicing

Easy access to all grease points

Standard Features
 

  • Hydrostatic transmission

  • ROPS/FOPS operator cab

  • Heating, demisting and ventilation

  • Front and rear washer/wipers

  • Suspension seat

  • Road lights

  • Turn signals

  • Right and left side mirrors

  • Two way hydraulic supply at the end of the boom

  • Mudguards

  • Turbo-charged engine

  • Narrow Hook-up for mounting of the equipment

  • Mechanical lock of the epuipment

  • Four DUNLOP 400/80x24 153B T37 TL tyres
T40170 Telescopic Handler  — 20/06/2005

Options
 

  • Reverse drive alarm

  • 2nd hydraulic function on boom

  • Cab air conditioning

  • Rear hydraulic hook and mirror

  • Rotating beacon

  • Cooling fan reverser for cleaning purpose

  • Rear hydraulic connection

  • Trailer brake valve

  • Work light on boom

  • Set of blue lights for hen houses

  • Hydraulic lock of equipment

  • Yoke + electrical plug

  • Roof windscreen wiper

  • Windscreen grill

  • Radio remote control

  • Transmission lock override

Attachments
 



T40170 Telescopic Handler  — 20/06/2005

Environmental
 
Accoustic pressure levels in the cab, EN 12053:2001 (LpA) 82 dB(A)
Level of accoustic power (LWA) — dB(A)
Whole body vibration (ISO 2631–1) —
Hand-arm vibration (ISO 5349–1) —

Safety
 
Seat belt, standard Should always be worn when operating the machine
Fully enclosed operator cab. standard Enclosed operator cab. Meets SAE-J1040 and ISO 3471 for Roll Over Protective Structure (ROPS) and SAE-J1043 and ISO 3449 for Falling Objects Protection Structure (FOPS).
Boom stop, standard Use for servicing if boom is raised
Parking brake, standard Always set brake when leaving the machine
Grab handles, standard Should always be used when entering/exiting the telescopic
Rear window, standard For emergency exit
Front and rear work lights, standard Use for indoor and low light operation
Back-up alarm, standard For use in jobs with low visibility. Alarm sounds when operated in reverse.
Rated load capacity charts, standard Attached inside the cab. Provide rated load capacities for loads and attachments.
Anti-tipping device, standard Provides load limiting.
Emergency button, standard Switches off the engine and blocks boom movements.
Emergency hand pump, standard Used for manually retracting the boom.

Navigation

Information

Bobcat Sverige AB

Vi är generalagent av Bobcats breda sortiment av entreprenadmaskiner i Sverige. Bobcat har varit marknadsledande tillverkare och utvecklare av kompaktmaskiner i 50 år!

Ring oss

Stockholm: +46(0)8-564 899 60
Kristianstad: +46 (0)44-24 40 10
Malmö: +46 (0)40-22 22 04
Göteborg: +46 (0)31-24 40 05