E62 Minigrävare

Intresserad?

Är du intresserad av denna produkten? Vänligen kontakta oss för vidare information.

Weights

Operating weight 6,130 kg
Additional weight for steel tracks 206 kg
Additional weight for long dipperstick 127 kg
Ground pressure with rubber tracks 34.4 kPa

 

Working Range

(A) Bucket pivot angle 179 °
(B) Maximum reach of working equipment 6,230 mm
(B) Maximum reach of working equipment, long dipperstick 6,525 mm
(C) Maximum reach at ground level 6,100 mm
(C*) Maximum reach at ground level, long dipperstick 6,400 mm
(D) Maximum working equipment radius with boom at maximum height and dipperstick fully retracted 2,530 mm
(D*) Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick 2,645 mm
(E) Maximum blade height 460 mm
(F) Maximum blade depth 440 mm
(G) Maximum height of working equipment with dipperstick retracted 4,381 mm
(H) Maximum bucket tooth height 5,785 mm
(H*) Maximum bucket tooth height, long dipperstick 6,005 mm
(I) Maximum dump height 4,045 mm
(I*) Maximum dump height, long dipperstick 4,260 mm
(J) Maximum depth of vertical wall which can be excavated 3,125 mm
(J) Maximum depth of vertical wall which can be excavated, long dipperstick 3,435 mm
(K) Maximum digging depth 3,815 mm
(K*) Maximum digging depth, long dipperstick 4,115 mm



Dimensions

() (* Dentoes values which long dipperstick installed)  
(A) Blade height 410 mm
(B) Clearance, upper structure to ground line 635 mm
(C) Ground line to top of engine cover 1,620 mm
(D) Length of track on ground 1,990 mm
(E) Machine centre line to blade 1,870 mm
(F) Minimum radius in travel position 4,400 mm
(G) Overall length of track assembly 2,500 mm
(H) Overall length in travel position 5,670 mm
(H*) Overall length in travel position, long dipperstick 5,669 mm
(I) Track lug height 21 mm
(J) Blade width 1,980 mm
(K) Height 2,550 mm
(L) Track width 400 mm
(M) Machine centre line to working equipment centre line, left-hand rotation 605 mm
(N) Machine centre line to working equipment centre line, right-hand rotation 829 mm
(O) Minimum turning radius 2,530 mm
(P) Swing clearance, rear 1,100 mm
(Q) Working width at maximum right-hand rotation 2,147 mm



Engine

Make / model Yanmar / 4TNV94L-ZXSDB
Fuel Diesel
Number of cylinders 4
Displacement 3,054 cm3
Maximum NET power (ISO 9249) 36.2 kW
Maximum NET torque (ISO 9249) 206 Nm



Performance

Digging force, dipperstick (ISO 6015) 29,300 N
Digging force, long dipperstick (ISO 6015) 26,200 N
Digging force, bucket (ISO 6015) 44,100 N
Drawbar pull 55,000 N
Travel speed, low range 2.7 km/h
Travel speed, high range 4.4 km/h

 

Hydraulic System

Pump type One engine-driven tandem axial piston pump
Pump capacity 132 L/min
Auxiliary flow 85 L/min
System relief pressure for auxiliary circuits 210 bar



Slew System

Boom swing, left 70 °
Boom swing, right 50 °
Slew rate 9.6 RPM



Fluid Capacities

Cooling system 10 L
Engine lubrication plus oil filter 10.2 L
Fuel reservoir 78 L
Hydraulic system 111 L



Environmental

Noise level LpA(EU Directive 2006/42/EC) 73 dB(A)
Noise level LWA(EU Directive 2000/14/EC) 97 dB(A)
Whole body vibration (ISO 2631–1) 0.4 ms-2
Hand-arm vibration (ISO 5349–1) 0.9 ms-2

 

Standard Features

  • 1980 mm dozer blade
  • 400 mm rubber track
  • 5.7 inch LCD screen
  • Engine/hydraulic monitor with shutdown
  • Fingertip auxiliary hydraulic control
  • Control console locks
  • Hydraulic joystick controls
  • Two-speed travel
  • Lockable storage compartment
  • Horn
  • Work lights
  • Retractable seat belt
  • Suspension seat with high back
  • Consoles with forwards/backwards adjustable displacement
  • TOPS/ROPS cab (1)
  • Boom & arm safety valves
  • Harness for rotating beacon
  • Fully adjustable air conditioning
  • Overload warning device
  • Sun visor
  • Left rear view mirror
  • Electric refueling pump
  • Auto idle
  • Auto shift travel
  • Auxiliary hydraulics (1st and 2nd circuits)
  • Auxiliary hydraulic line on arm with quick couplers
  • Warranty: 12 months, 2000 hours (whichever occurs first)

 

(1) Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117



Options

  • Steel tracks
  • Third auxiliary hydraulic line (Clamshell Piping)
  • Long dipperstick