TL30.70 Teleskop

Intresserad?

Är du intresserad av denna produkten? Vänligen kontakta oss för vidare information.

TL30.70 Telescopic Loader

This 7 m telescopic loader is a unique solution which combines compactness with competitiveness. With a 3 tonne rated capacity, the TL30.70 is ideally suited for rental companies and especially for use on tight job sites. The TL30.70 is available with a low cab position for job sites with limited height or with a higher cab position for enhanced visibility of the forks. The compactness of the TL30.70 ensures its accessibility and manoeuvrability are excellent.

 

Performance

Work more effectively with greater breakout force, rated operating capacities, faster cycle times and quicker turns.

 

Comfort

Climb into the large, comfortable cab and enjoy more visibility.

 

Uptime Protection

With features and systems that aren’t offered by others, Bobcat® Telescopic loaders are ready to work.

 

Attachments Versatility

Form a versatile team with your Bobcat® Telescopic loader and the most attachment options.

 

TL30.70 Low Cab 75 IV


Performance

Lifting height — on tyres
6,675 mm
Rated capacity
3,000 kg
Capacity (at max. height on tyres) 2,000 kg

Capacity (at max. reach on tyres)

1,050 kg

Max. reach on tyres

4,020 mm


Weights

Weight (unladen) 

5,640 kg


Traction

Standard tyres SOLIDEAL 405/70-20 14PR


Drive System

Transmission Hydrostatic with electronic regulation
Main drive Hydrostatic motor
1st gear – Turtle 7.5 km/h
1st gear – Rabbit 29.5 km/h


Engine

Make / Model Bobcat D34
Fuel Diesel
Cooling Coolant
Rated power (ISO 14396:2002) at 2400 RPM 75 HP
Rated power (ISO 14396:2002) at 2400 RPM 55.2 kW
Maximum torque at 1400 RPM 325 Nm
Number of cylinders 4
Displacement 3.4 L


Hydraulic System

Pump type
Gear pump with LS valve
Pump capacity 80 L/min
Relief valve pressure setting 250 bar


Cycle Times

Lift time - no load 6.0 s
Lower time - no load 4.2 s
Telescope in time at max. reach - no load 4.2 s
Telescope in time at max. height - no load 4.2 s
Telescope out time at max. reach - no load 7.4 s
Telescope out time at max. height - no load 7.4 s


Brakes

Engine braking Hydrostatic
Parking and emergency brake Passive brake


Fluid Capacities

Fuel tank 115 L
Hydraulic reservoir 47 L


Environmental

Operator noise level (LpA) (EN 12053) 77 dB(A)
Operator noise level (LpA) (EN 12053) uncertainty 4 dB(A)
Level of acoustic power (LWA) 106 dB(A)
Whole body vibration (EN 13059) 1.7 ms-2


Load Charts

With forks on 20 inch tyres


With forks on 24 inch tyres
With jib on 20 or 24 inch tyres

 

Dimensions

 

(A) Overall length (with forks)
6,240 mm
(B) Overall length (fork frame) 5,035 mm
(C) Overall length (without attachment) 4,670 mm
(D)
Overall length (Front tire to rear of machine) 4,185 mm
(E) Overall height (with rotating beacon) 2,290 mm
(F)
Overall height 2,100 mm
(G) Carriage rotation angle 136 °
(I) Height to back of the machine 1,587 mm
(J)  Ground clearance 264 mm
(L)  Front axle to front carriage 1,400 mm
(M) Wheelbase 2,820 mm
(N) Rear axle to back of machine 667 mm
(O) Operator cab outside width 930 mm
(P) Track width (front & rear) 1,666 mm
(Q) Width over standard tyres 2,100 mm
(R) External turning radius (with forks spaced 1040 mm apart) 5,035 mm
(R) External turning radius (with forks spaced 1360 mm apart) 5,130 mm
(S) External turning radius (at tyres) 3,717 mm
(U) Internal turning radius 1,329 mm
(V) Operator cab inside width 857 mm

 

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.

 

TL30.70 Low Cab 100 IV


Performance

Lifting height — on tyres
6,675 mm
Rated capacity
3,000 kg
Capacity (at max. height on tyres) 2,000 kg

Capacity (at max. reach on tyres)

1,050 kg
Max. reach on tyres 4,020 mm


Weights

Weight (unladen) 

5,800 kg


Traction

Standard tyres SOLIDEAL 405/70-20 14PR


Drive System

Transmission Hydrostatic with electronic regulation
Main drive Hydrostatic motor
1st gear – Turtle (40 KM/H option) 10 (10) km/h
1st gear – Rabbit (40 KM/H option) 31 (40 with 24 inch tyres) km/h

 

Engine

Make / Model Bobcat D34
Fuel Diesel
Cooling Coolant
Rated power (ISO 14396:2002) at 2400 RPM 75 HP
Rated power (ISO 14396:2002) at 2400 RPM 55.2 kW
Maximum torque at 1400 RPM 430 Nm
Number of cylinders 4
Displacement 3.4 L


*Stage IIIB Bobcat D34 also available in 55kW/75HP version (without SCR/Ad-Blue after-treatment)


Hydraulic System

Pump type
Gear pump with LS valve
Pump capacity 80 L/min
Relief valve pressure setting 250 bar


Cycle Times

Lift time - no load 5.3 s
Lower time - no load 4 s
Telescope in time at max. reach - no load 4.2 s
Telescope in time at max. height - no load 4.2 s
Telescope out time at max. reach - no load 6.3 s
Telescope out time at max. height - no load 6.3 s

 

Brakes

Engine braking Hydrostatic
Parking and emergency brake Passive brake


Fluid Capacities

Fuel tank 115 L
Hydraulic reservoir 47 L


Environmental

Operator noise level (LpA) (EN 12053) 77 dB(A)
Operator noise level (LpA) (EN 12053) uncertainty 4 dB(A)
Level of acoustic power (LWA) 106 dB(A)
Whole body vibration (EN 13059) 1.7 ms-2


Load Charts

With forks on 20 inch tyres


With forks on 24 inch tyres
With jib on 20 or 24 inch tyres

 

Dimensions

 

(A) Overall length (with forks)
6,240 mm
(B) Overall length (fork frame) 5,035 mm
(C) Overall length (without attachment) 4,670 mm
(D)
Overall length (Front tire to rear of machine) 4,185 mm
(E) Overall height (with rotating beacon) 2,290 mm
(F)
Overall height 2,100 mm
(G) Carriage rotation angle 136 °
(I) Height to back of the machine 1,587 mm
(J)  Ground clearance 264 mm
(L)  Front axle to front carriage 1,400 mm
(M) Wheelbase 2,820 mm
(N) Rear axle to back of machine 667 mm
(O) Operator cab outside width 930 mm
(P) Track width (front & rear) 1,666 mm
(Q) Width over standard tyres 2,100 mm
(R) External turning radius (with forks spaced 1040 mm apart) 5,035 mm
(R) External turning radius (with forks spaced 1360 mm apart) 5,130 mm
(S) External turning radius (at tyres) 3,717 mm
(U) Internal turning radius 1,329 mm
(V) Operator cab inside width 857 mm