E17 Minigrävare


Är du intresserad av denna produkten? Vänligen kontakta oss för vidare information.



Operating weight 1,711 kg
Additional weight for cab with heating 96 kg
Additional weight for long dozer blade 9 kg
Ground pressure with rubber tracks 29.4 kPa

Working Range

(A) Bucket pivot angle 196 °
(B) Maximum reach of working equipment 3,919 mm
(C) Maximum reach at ground level 3,871 mm
(D) Maximum working equipment radius with boom at maximum height and dipperstick fully retracted 1,526 mm
(E) Maximum blade height 220 mm
(F) Maximum blade depth 204 mm
(G) Maximum height of working equipment with dipperstick retracted 2,405 mm
(H) Maximum bucket tooth height 3,371 mm
(I) Maximum dump height 2,370 mm
(J) Maximum depth of vertical wall which can be excavated 1,810 mm
(K) Maximum digging depth 2,249 mm


() (* Dentoes values which long dipperstick installed)  
(A) Blade height 235 mm
(B) Clearance, upper structure to ground line 419 mm
(C) Ground line to top of engine cover 1,340 mm
(D) Length of track on ground 1,114 mm
(E) Machine centre line to blade 1,045 mm
(F) Minimum radius in travel position 2,666 mm
(G) Overall length of track assembly 1,476 mm
(H) Overall length in travel position 3,665 mm
(I) Track lug height 25 mm
(J) Blade width 980 mm
(J*) Blade width (extensions extended) 1,360 mm
(K) Height 2,299 mm
(L) Track width 230 mm
(M) Machine centre line to working equipment centre line, left-hand rotation 433 mm
(N) Machine centre line to working equipment centre line, right-hand rotation 589 mm
(O) Minimum turning radius 1,128 mm
(P) Swing clearance, rear 1,009 mm
(Q) Working width at maximum right-hand rotation 1,801 mm
(R) Working width at maximum left-hand rotation 1,645 mm


Make / model Kubota / D722-E2B-BCZ-7
Fuel Diesel
Number of cylinders 3
Displacement 0.7 L
Maximum NET power (ISO 9249) 9.9 kW
Maximum NET torque (ISO 9249) 42.3 Nm


Digging force, dipperstick (ISO 6015) 9,108 N
Digging force, bucket (ISO 6015) 16,177 N
Drawbar pull 14,334 N
Travel speed, low range 2 km/h
Travel speed, high range 3.2 km/h

Hydraulic System

Pump type Triple gear pump
Pump capacity 32.5 L/min
Pump 1 capacity at 2500 RPM 10 L/min
Pump 2 and 3 capacity at 2500 RPM 11.2 L/min
Auxiliary flow 32.5 L/min
Auxiliary relief 227.0 bar
Boom port relief base and rod end 210.0 - 250.0 bar

Slew System

Boom swing, left 80 °
Boom swing, right 60 °
Slew rate 8.7 RPM

Fluid Capacities

Cooling system 3.3 L
Engine lubrication plus oil filter 3.3 L
Fuel reservoir 19 L
Hydraulic system 17 L


Noise level LpA(EU Directive 2006/42/EC) 79 dB(A)
Noise level LWA(EU Directive 2000/14/EC) 93 dB(A)
Whole body vibration (ISO 2631–1) 0.7 ms-2
Hand-arm vibration (ISO 5349–1) 1.4 ms-2
Hand-arm vibration (ISO 5349–1) Uncertainty 0.4 ms-2

Standard Features

  • TOPS/ROPS/FOPS canopy (1)
  • 980 mm dozer blade with two 190 mm blade extensions
  • Exposed counterweight with 4 mm steel tailgate
  • 230 mm rubber track
  • Double acting auxiliary hydraulics
  • Control console locks
  • Horn
  • Hydraulic joystick controls
  • Retractable seat belt
  • Full fuel warning alarm
  • Battery kill switch
  • Cupholders
  • Foldable and ergonomic pedals
  • Hydraulically retractable undercarriage from 1360 mm to 980 mm
  • Upper structure four point tie down
  • Work light
  • Engine with auto shutdown
  • Hydraulic and travel control lockout
  • Warranty: 12 months, 2000 hours (whichever occurs first)


(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.


  • TOPS/ROPS cab with heater
  • Keyless start
  • Travel motion alarm
  • Cab enclosure, vinyl
  • Cab/canopy light kit
  • Special applications kit
  • Long dozer blade
  • AM/FM MP3 stereo radio
  • Auxiliary hydraulic line on arm
  • Boom load holding valve
  • Klac and Lehnhoff couplers
  • Object handling certification
  • Deluxe textile suspension seat
  • Two speed travel
  • Auxiliary quick couplers