E32 Minigrävare
Intresserad?
Är du intresserad av denna produkten? Vänligen kontakta oss för vidare information.
Weights
Operating weight | 3,219 kg |
Additional weight for cab with heating | 121 kg |
Additional weight for cab with HVAC | 140 kg |
Additional weight for long dipperstick | 306 kg |
Ground pressure with rubber tracks | 29.2 kPa |
Working Range

(A) | Bucket pivot angle | 185 ° |
(B) | Maximum reach of working equipment | 5,101 mm |
(B) | Maximum reach of working equipment, long dipperstick | 5,383 mm |
(C) | Maximum reach at ground level | 4,980 mm |
(C*) | Maximum reach at ground level, long dipperstick | 5,270 mm |
(D) | Maximum working equipment radius with boom at maximum height and dipperstick fully retracted | 2,017 mm |
(D*) | Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick | 2,077 mm |
(E) | Maximum blade height | 376 mm |
(F) | Maximum blade depth | 371 mm |
(G) | Maximum height of working equipment with dipperstick retracted | 3,708 mm |
(H) | Maximum bucket tooth height | 4,804 mm |
(H*) | Maximum bucket tooth height, long dipperstick | 4,985 mm |
(I) | Maximum dump height | 3,437 mm |
(I*) | Maximum dump height, long dipperstick | 3,618 mm |
(J) | Maximum depth of vertical wall which can be excavated | 2,136 mm |
(J) | Maximum depth of vertical wall which can be excavated, long dipperstick | 2,414 mm |
(K) | Maximum digging depth | 3,117 mm |
(K*) | Maximum digging depth, long dipperstick | 3,417 mm |
Dimensions

() | (* Dentoes values which long dipperstick installed) | |
(A) | Blade height | 353 mm |
(B) | Clearance, upper structure to ground line | 537 mm |
(C) | Ground line to top of engine cover | 1,473 mm |
(D) | Length of track on ground | 1,543 mm |
(E) | Machine centre line to blade | 1,546 mm |
(F) | Minimum radius in travel position | 3,537 mm |
(G) | Overall length of track assembly | 1,964 mm |
(H) | Overall length in travel position | 4,662 mm |
(H*) | Overall length in travel position, long dipperstick | 4,761 mm |
(I) | Track lug height | 23 mm |
(J) | Blade width | 1,520 mm |
(K) | Height | 2,429 mm |
(L) | Track width | 300 mm |
(M) | Machine centre line to working equipment centre line, left-hand rotation | 371 mm |
(N) | Machine centre line to working equipment centre line, right-hand rotation | 554 mm |
(O) | Minimum turning radius | 1,623 mm |
(P) | Swing clearance, rear | 1,125 mm |
(Q) | Working width at maximum right-hand rotation | 1,982 mm |
(R) | Working width at maximum left-hand rotation | 1,839 mm |
Engine
Make / model | Kubota / D1803-M-D1-E3B-BC-3 |
Fuel | Diesel |
Number of cylinders | 3 |
Displacement | 1,862 cm3 |
Maximum NET power (ISO 9249) | 23.1 kW |
Maximum NET torque (ISO 9249) | 107.4 Nm |
Performance
Digging force, dipperstick (ISO 6015) | 21,000 N |
Digging force, long dipperstick (ISO 6015) | 18,320 N |
Digging force, bucket (ISO 6015) | 31,500 N |
Drawbar pull | 34,132 N |
Travel speed, low range | 2.6 km/h |
Travel speed, high range | 4.7 km/h |
Hydraulic System
Pump type | Single outlet variable displacement, load sensing torque limited pump |
Piston pump capacity | 100.8 L/min |
Auxiliary flow | 63.9 L/min |
Auxiliary relief | 206.0 bar |
Slew System
Boom swing, left | 77 ° |
Boom swing, right | 55 ° |
Slew rate | 8.6 RPM |
Fluid Capacities
Cooling system | 8 L |
Engine lubrication plus oil filter | 5.2 L |
Fuel reservoir | 53.1 L |
Hydraulic system | 39.7 L |
Environmental
Noise level LpA(EU Directive 2006/42/EC) | 77 dB(A) |
Noise level LWA(EU Directive 2000/14/EC) | 94 dB(A) |
Whole body vibration (ISO 2631–1) | 0.2 ms-2 |
Hand-arm vibration (ISO 5349–1) | 0.4 ms-2 |
Standard Features
- 1520 mm dozer blade
- 300 mm rubber tracks
- Auto idle
- Auto shift travel
- Auxiliary hydraulics with Quick Couplers
- Selectable auxiliary hydraulic flow
- Blade float feature
- Cab light
- Clamp ready
- Control console locks
- Cupholder
- Engine/hydraulic monitor with shutdown
- Fingertip auxiliary hydraulic control
- Horn
- Full fuel warning alarm
- Hydraulic joystick controls
- Retractable seat belt
- Suspension seat with high back
- TOPS/ROPS* canopy (1)
- Two-speed travel
- Work lights (boom and upperstructure)
- Warranty: 12 months, 2000 hours (whichever occurs first)
(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117.
Options
- Air conditioning
- TOPS/ROPS cab with heater
- Long dipperstick
- 2nd Auxiliary hydraulics
- Deluxe textile suspension seat
- Boom safety valve with overload warning
- Boom & arm safety valves with overload warning
- AM/FM stereo radio
- FOGS kit (Overhead guard)
- Lifting chain kit
- Travel motion alarm
- Steel tracks
- Beacon kit
- Left and right mirror kit
- Additional work light kit
- Rubber bolt-on pads for steel tracks
- Special applications kit
- Fuel filter with transparent water separator