S70 Kompaktlastare
Intresserad?
Är du intresserad av denna produkten? Vänligen kontakta oss för vidare information.
Ladda ner pdf
Performance |
|
Tipping load (ISO 14397-1) | 686 kg |
Rated operating capacity (ISO 14397-1) | 343 kg |
Pump capacity | 37 L/min |
System relief at quick couplers | 20.7 MPa |
Max. travel speed (low range) | 9.8 km/h |
Engine |
|
Make / Model | Kubota / D1005-E4B-BC-3 (Stage V) |
Fuel | Diesel |
Cooling |
Liquid |
Power at 2400 RPM |
17.5 kW |
Torque at 1425 RPM (SAE J1995 Gross) | 62.8 Nm |
Number of cylinders | 3 |
Displacement | 1,001 cm3 |
Fuel tank | 24.6 L |
Weights |
|
Operating weight | 1,268 kg |
Shipping weight | 1,109 kg |
Dimensions |
|
![]() |
|
(A) Operating height | 3131 mm |
(B) Height with operator cab | 1814 mm |
(C) Angle of departure | 25° |
(D) Ground clearance | 141 mm |
(E) Wheelbase | 722 mm |
(F) Length without attachment | 1917 mm |
(G) Length with standard bucket | 2553 mm |
(H) Rollback at ground position | 22° |
(I) Dump height with standard bucket | 1891 mm |
(J) Height to bucket hinge pin | 2399 mm |
(K) Dump reach at maximum height | 469 mm |
(L) Dump angle at maximum height | 34° |
(M) Rollback fully raised at maximum height | 97° |
(N) Width over standard bucket | 914 mm |
(O) Turning radius with standard bucket | 1557 mm |
(P) Track, standard tyres | 752 mm |
(Q) Width over standard tyres | 901 mm |
Controls |
|
Vehicle steering |
Direction and speed controlled by two hand levers |
Loader hydraulics tilt and lift | Separate foot pedals |
Front auxiliary (standard) | Lateral movement of right-hand steering lever |
Drive System |
|
Transmission |
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors |
Standard Features |
|
(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471 |
Options |
|
|
Attachments |
|
|
Environmental |
|
Operator LpA(98/37 & 474-1) |
86 dB(A) |
Operator LpA uncertainty | 2.5 |
Noise level LWA(EU Directive 2000/14/EC) | 97 dB(A) |
Noise level LWA uncertainty | |
Whole body vibration (ISO 2631–1) | 1.3 ms-2 |
Whole body vibration uncertainty | |
Hand-arm vibration (ISO 5349–1) | 1.5 ms-2 |
Hard-arm vibration uncertainty |
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.